Doulton CeraGuard Water Filtration System

W9371010

The Doulton CeraGuard Water Filtration System (W9371010) is a highly advanced three stage complete Doulton water filter system. The CeraGuard Water Filter System is ideally suited for commercial and residential drinking water systems, pre and post reverse osmosis filtration, water coolers, food service applications, undersink systems, and more.

This Doulton CeraGuard Water Filtration System uses a unique combination of three innovative Doulton filters to reduce and remove unwanted impurities and contaminants in your water supply. This Doulton water filter system utilizes three separate water filter cartridges to provide maximum water filtration and purification, including the:

CeraGuard Carbon Media Filter (CFCM-CG) - removes/reduces chemical contaminants and other impurities in your water, especially chlorine; improves water taste and odor
CeraGuard Mixed Media Filter (CFMM-CG) - removes/reduces metals, organic material, and other impurities and contaminants from your water; also removes/reduces lead, arsenic, copper, aluminum, fluoride, mercury, sediment, dirt, rust, and more
CeraGuard Ceramic Filter (CFUC-CG / IICQ-RF) - removes/reduces cysts, bacteria, viruses, VOCs; also further reduces lead, arsenic, fluoride, dirt, sediment, rust, and more in conjunction with the CeraGuard Mixed Media Filter

In addition to the three filter cartridges listed above, this Doulton water filter system includes all necessary accessories for connection and use, including:

One filter housing wrench
1/4" plastic tubing with connectors
One saddle valve or EZ-Adapter valve
Three filter housing sumps with O-rings
Manifold body with cover for three housing sumps
Specialty ceramic disc faucet spout with connection hardware
Plus all other needed valves, tubes, and fittings

This Doulton filtration system is a point of use system, meaning it is an effective choice as an undersink water filter system. Though it is designed to fit under a sink, it can be placed wherever is most convenient for you.

Doulton CeraGuard Water Filtration System with Accessories - Specifications:

Temp. Range: 35 - 110 F
pH: 6.5 to 8.5 recommended
Chlorine: 0 - 4 PPM
Iron: Less than 0.5 PPM
Manganese: Less than 0.05 PPM
Hydrogen Sulfide: Less than 0.3 PPM
Max. Operating Pressure: 20 - 125 PSI
Average Flow Rate: 0.5 GPM; Max. Flow Rate: About 1-1.5 GPM
Filter Life: Varies according to each filter; the three filters must be replaced at regular intervals to maintain top performance

Despite its deep filtration action, this Doulton filter system retains essential minerals in water which are beneficial to health. The CeraGuard filter system has been tested and certified to NSF Standards 42 & 53. It is designed for use on cold water lines only. No power is required to run this Doulton CeraGuard system.

Full and detailed instructions for installation and use of this Doulton filtration system are included. This Doulton CeraGuard filtration system is also known as the Doulton CeraGuard Filter+ Micro-Filtration Drinking Water System and by Doulton part number W9371010.