Doulton CeraGuard Water Purification System

W9371020

The Doulton CeraGuard Water Purification System (W9371020) is a highly advanced three stage complete Doulton water purifier system. The CeraGuard Water Purifier System is ideally suited for commercial and residential drinking water systems, pre and post reverse osmosis purification, water coolers, food service applications, undersink systems, and more.

This Doulton CeraGuard Water Purification System uses a unique combination of three innovative Doulton filters to reduce and remove unwanted impurities and contaminants in your water supply. This Doulton water purification system utilizes three separate water filter cartridges to provide maximum water filtration and purification, including the:

CeraGuard Carbon Media Filter (CFCM-CG) - removes/reduces chemical contaminants and other impurities in your water, especially chlorine; improves water taste and odor
CeraGuard Mixed Media Filter (CFMM-CG) - removes/reduces heavy metals, organic material, and other impurities and contaminants in your water; also removes/reduces lead, arsenic, copper, aluminum, fluoride, mercury, sediment, dirt, rust, and more
CeraGuard Ultra-Filtration Module Filter (CFHF-CG) - removes/reduces suspended solids, colloids, fine silt particles, rust, sediment, dirt, and other contaminants that will prematurely clog the other two water filter cartridges used by the Doulton CeraGuard Water Purifier System; also reduces 99% of bacteria and viruses as well as 99% of cysts such as Cryptosporidium, Giardia, and Lamblia. This advanced Doulton filter is the main water filter of the CeraGuard Purification System.

In addition to the three filter cartridges listed above, this Doulton water purifier system includes all necessary accessories for connection and use, including:

One filter housing wrench
1/4" plastic tubing with connectors
One saddle valve or EZ-Adapter valve
Three filter housing sumps with O-rings
Manifold body with cover for three housing sumps
Four gallon stainless steel water storage tank (RO-132)
Specialty ceramic disc faucet spout with connection hardware
Plus all other needed valves, tubes, and fittings

This Doulton purification system is a point of use system, meaning it is an effective choice as an undersink water filter system. Though it is designed to fit under a sink, it can be placed wherever is most convenient for you.

Doulton CeraGuard Water Purification System with Accessories - Specifications:

Temp. Range: 35 - 110 F
pH: 6.5 to 8.5 recommended
Chlorine: 0 - 4 PPM
Iron: Less than 0.5 PPM
Manganese: Less than 0.05 PPM
Hydrogen Sulfide: Less than 0.3 PPM
Max. Operating Pressure: 20 - 125 PSI
Total Dissolved Solids: Less than 500 PPM
Average Flow Rate: 1.25 GPM (with bladder tank); 0.18 direct; Max. Flow Rate: About 1.5 GPM
Filter Life: Varies according to each filter; the three filters must be replaced at regular intervals to maintain top performance

Despite its deep purification action, this Doulton filter system retains essential minerals in water which are beneficial to health. The CeraGuard purifier system has been tested and certified to NSF Standards 42 & 53. It is designed for use on cold water lines only. No power is required to run this Doulton CeraGuard system.

Full and detailed instructions for installation and use of this Doulton water purification system are included. This Doulton purifier system is also known as the Doulton CeraGuard Purifier+ Ultra-Filtration Drinking Water System and by Doulton part number W9371020.