Harmsco ST/6 Spa Filter: Filbur FC-3060 - T380
FC-3060
The Filbur FC-3060 is a compatible replacement spa filter for the:
- Harmsco ST/6 spa filter
- many others (see list below)
This compatible filter replacement will fit all spas, jacuzzis, and hot tubs which use the Harmsco ST/6 Spa Filter.
Harmsco ST/6 Spa Filter / Filbur FC-3060 Spa Filter Replacement Product Specifications:
- Length: 9 3/4 inches
- Outer Diameter: 2 3/4 inches
- Top: 1 1/16 inches open hole
- Bottom: 1 1/16 inches open hole
- Square Feet: 6 square feet
This Harmsco ST/6 Spa Filter is known by many other part numbers and filter names including the following replacement spa filter part numbers:
- PH 6 / PH6-3
- Lifeguard CL 9
- Unicel T-380 / Unicel T380
- Filbur FC-3060 / FC1288
- OEM 24101-19 / 2410119
- Harmsco ST/6 / ST6
- Pleatco PH6-4 / PH64
- 57000500 / ST6-3 / ST6
- 17-2055 / 17-175-1280
- FC-2315 / FC-3061 / FC-3062
- C-2606 / T-380R / C-2306
- 250006 / C-2308 / FC-2308
- Universal Six / OTC/6-4 / 57011400
- 17-2006 / 174819 / 174865 / 17-2048
- Swimquip 6 / Swimquip 108 / Swimquip 216 / Swimquip 72
- American Caribe 133 / American Caribe 184 / American Caribe 368
This compatible Harmsco ST6 spa filter is made of advanced Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores which ensures durability and consistent flow.
In addition to replacing the Harmsco ST/6 spa filter, this compatible Filbur spa filter replacement will fit many other spas including those made by American Products, Harmsco, Pac Fab, Pentair Pool Products, Premier, Purex, Rainbow Plastics, Springwater, Sta-Rite and Other Manufacturers - compare the dimensions of this filter to your old filter before purchasing in order to determine size compatibility.
Cleaning your Filbur Pool and Spa Filters
- It is time to clean your spa or pool filter cartridge when you notice a decrease in the pressure from your jets, or when the pressure in your spa filter tank increases by 8 psi from when the filter was newly installed.
- In order to clean the spa filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the spa filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons of water.
- Thoroughly rinse the spa filter cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the replacement spa filter.
- DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the spa filter cartridges as these methods can damage the filter media.
Harmsco ST/6 Spa Filter: Filbur FC-3060 - T380 Product Reviews :
Write a review
