The GeneralAire 1099LHS is an ideal bypass humidifier for the following applications:
The GeneralAire 1099LHS 23.1 GPD Bypass Humidifier is a whole house bypass humidifier that can be mounted on either the return duct or supply system. Also known as part number 5015, this General Aire Model 1099-LHS comes with a humidistat that adds the correct amount of humidity to your indoor air. This process will help to reduce static electricity, improve your air quality, as well as protect your wood floors and furniture from cracking and drying out.
For optimum performance, replace your humidifier filter pad as recommended and wash out your General Aire 23.1 GPD Humidifier annually. Once this humidifier is installed and operation, there is no need for adjustments besides setting the control knob to the desired level of humidification. To turn your 1099LHS Humidifier off, close the water supply valve, switch the electrical power off and turn your humidistat off.
GeneralAire 1099LHS Bypass Humidifier specifications:
According to the manufacturer's warranty, this humidifier is warranted to the consumer against defects in materials and workmanship for a period of one year from the date of installation if it is properly registered by the return of the warranty registration card to the manufacturer. Evaporator plates, pads or sleeves are not covered under this limited warranty or any other warranties from the manufacturer.
There is a 24-volt and 120-volt version of the GeneralAire 1099LHS Flow Through Bypass Humidifier. The 120-volt humidifier will have a small metal box attached to the coil of its existing solenoid valve. The GeneralAire 1099LHS Humidifier uses the 24-volt option of the solenoid valve. Do not install your GeneralAire 1099 Humidifier where temperatures fall below 32 degrees Fahrenheit or where plenum temperatures exceed 200 degrees Fahrenheit.