Hydronix 30" Sediment Filter Cartridge - 25 Micron
The Hydronix 30" Sediment Filter Cartridge is the same 25 micron rated filter as the Liquatec SDF-25-3025 30" Sediment Filter. This cartridge filter is also known as part number SDC-25-3025. The Hydronix sediment depth cartridge is constructed with 4 separate layers of micron filtration and the outside-in flow allows the outer layer to trap larger sized particles, resulting in a lower pressure drop compared to conventional filters. The graded density provides a higher dirt holding capacity over standard spun polypropylene and string wound cartridges.
Do not use this sediment filter with microbiologically unsafe water without adequate disinfection before or after the system. This 100% polypropylene water filter is resistant to chemicals and reduces waterborne contaminants like silt, rust, sediment and sand. The Hydronix 25 micron sediment cartridge is widely used as pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon (GAC) filters.
Hydronix 30" Sediment Depth Cartridge specifications:
- 25 micron rating
- Dimensions: 2 1/2" x 30"
- 100% polypropylene media
- Flow rate: 0.3 psi@ 15 gpm
- Certified to NSF standard 42
- Change filter every 6 months
- Liquatec SDF-25-3025 Filter Replacement
- Fits standard water filter housings using a 30" x 2 1/2" media
The operating temperature range for this 25 micron water filter cartridge is 40 degrees to 145 degrees Fahrenheit. This filter is surfactant free, binder free and adhesive free. This Hydronix Sediment Filter Cartridge is ideal for a wide range of residential, commercial, industrial and food service applications. Change your water filter every 6 months depending on usage and water quality. Be sure to double check the size of your filter before purchasing. See our full line of 30" sediment filters: 30 inch Sediment Filters
Hydronix 30" Sediment Filter Cartridge - 25 Micron Product Reviews :
Write a review