The Hydronix 30" Sediment Filter Cartridge is the economical replacement for the Liquatec 5 Micron 30" Sediment Filter. This 100% polypropylene water filter cartridge, also known as part number SDC-25-3005 is widely used as pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon (GAC) filters. The graded density of the Hydronix sediment filter provides a higher dirt holding capacity over standard spun polypropylene and string wound cartridges. In addition to replacing the Liquatec SDF-25-3005, the Hydronix 30" polypropylene filter replaces the Pentek 155228-43 and Watts FPMB5-30 water filter cartridge.
With four layers, outside-in flow and step-by-step 5 micron rating, this cartridge water filter effectively retains particles while extending the life with a lower pressure drop. The Hydronix 30" sediment filter is ideal for a variety of residential, commercial, industrial and food service applications. The Hydronix 5 micron filter is surfactant free, binder free and adhesive free. Do not use this sediment filter cartridge with microbiologically unsafe water without adequate disinfection.
Hydronix SDC-25-3005 cartridge filter specifications:
Based on air quality and usage, change your Hydronix sediment water filter every 6 months for optimum performance of your system. Be sure to double check the size of your replacement filter cartridge before purchasing. This Hydronix 5 Micron Water Filter will fit filter housings requiring a standard 30" Sediment Filter Cartridge such as Pentek, American Plumber, US Filter, Culligan, Ametek and other standard housings. The operating temperature range for this 5 Micron Hydronix 30" Sediment Cartridge is 40 degrees to 145 degrees Fahrenheit. See our full line of 30" Sediment Filters: 30 inch Sediment Filters