The Hydronix 20" Pleated Sediment Filter the same quality filter as the Liquatec SPF-25-2050. Also known as part number SPC-25-2050, this filter reduces waterborne particles and contaminants like rust, silt, sand and sediment as small as 50 microns. Made from durable non-woven polyester, the dirt holding capacity extends the time between filter changes. The Hydronix sediment pleated filter is resistant to bacteria and chemicals. Water that is of unknown quality or is microbiologically unsafe should not be used without adequate disinfection.
In addition to replacing the Liquatec SPF-25-2050, this Hydronix pleated filter also replaces the Pentek 255488-43 and Watts FM-50-20. The media around the polypropylene core is pleated for additional strength and the ends of this sediment cartridge are immersed in a thermo setting vinyl plastisol. Embedding and sealing each end of the pleat, fuses the three components together to form a unified end cap and gasket.
Hydronix 20" Sediment Pleated Cartridge specifications:
The Hydronix 20" sediment filter has a flow rate of 20 gallons per minute and is ideal for a variety of residential, industrial and commercial applications. The temperature capacity ranges from 40 degrees to 125 degrees Fahrenheit (4.4 to 51.7 degrees Celsius). The Hydronix SPC-25-2050 pleated filter fits standard water filter housings requiring a 20" x 2 1/2" media. This sediment filter is washable, reusable and durable.
See our complete line of 20" Sediment Filters: 20 Inch Sediment Filters