This Filbur FC-0195 replaces the Marquis 50 Spa Filter that is used in Marquis Spas. This Filbur spa filter is also compatible with OEM filter 370-0237 and the Unicel 5CH-502 filter.
This Filbur spa filter matches or exceeds the quality of the original Marquis Spas filter cartridge. Filbur spa filters are made of Reemay spunbound polyester pleated filter media with thermally-bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. Rest assured you are getting a filter that is compatible to the OEM Marquis spa filters, but for a more economical price.
Filbur FC0195 / Marquis 50 Spa Filter Specifications:
- Length: 12 1/2"
- Diameter: 5 3/16"
- Top: Handle
- Bottom: 2" MPT
- Square Feet: 50
- Media: 3 oz
This compatible Marquis spa filter should be replaced every three months.
Cleaning your Filbur Pool and Spa Filters
- It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed.
- In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water.
- Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter.
- DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
