Pentek ST-BC-4 2" Stainless Steel Filter Housing
You Save: 40%
Ships in 14 to 15 business days.
The Pentek ST-BC-4 2" Stainless Steel Filter Housing is the replacement part for the following filter housing models:
- American Plumber ST-BC-4 Stainless Steel Housing
- Ametek ST-BC-4 Stainless Steel Housing
- US Filter ST-BC-4 Stainless Steel Housing
- US Filter 156025 Stainless Steel Housing
The Pentek 156025-02 is a 2" Stainless Steel Filter Housing which is ideal for restaurants, schools, institutions, farms, and industrial use. The Pentek STBC4 is the replacement part for the American Plumber ST-BC-4, Ametek ST-BC-4, USFilter ST-BC-4 & US Filter 156025 Stainless Steel Filter Housings.
This Pentek ST-BC-4 water filter housing is simple to install and maintain, and holds four (4) 10" x 2-1/2" double open-end cartridges (filters are not included). This Pentek filter housing unit drains on both the “clean” and “dirty” sides of the sump.
Pentek ST-BC-4 Stainless Steel Filter Housing Specifications:
- Part Numbers: 156025-02 or Pentek ST-BC-4
- Can Replace the Following Parts: American Plumber ST-BC-4, Ametek ST-BC-4, USFilter ST-BC-4 & US Filter 156025 Stainless Steel Filter Housings
- Includes (1) 2" Filter Housing; (1) Pentek 143221 belly clamp; (1) Pentek 143218 O-ring
- Holds four (4) 10" x 2.5" double open-end cartridges
- Filter cartridges not included
- Filter cartridge life depends on the water filter cartridge used
- Application: Ideal for schools, restaurants, farms, institutions and industrial use
- Simple to install and maintain
- Drains on both the "clean" and "dirty" sides of the sump are included
- Housing: Durable Construction Brushed 304 Stainless Steel
- Finish: Gray-silver epoxy
- Dimensions (Height x OA Diameter): 19-1⁄4" x 10"
- Pipe Size (NPT): 2"
- Recommended Flow Rate: 28 GPM
- Maximum Temperature: 300 Degrees Fahrenheit
- Maximum Pressure: 125 PSI
- Maximum Number Cartridges: 4 x 1
- Maximum Cartridges Diameter: 3"
- Max. Cartridge Length: 9-3⁄4" or 10"
- Sealing Gasket: Buna-N
- Limited Manufacturer Warranty
- The Pentek ST-BC-4 water filter housing will not accept model GAC, CC, CGAC, TSGAC, WS, PCF or PCC series cartridges.
- Replacement Filters Examples: Pentek ECP1-10 10" Sediment Filter - 1 Micron; Pentek CRE-1 Ceramic Replacement Element; Hydronix 10" String Wound Water Filter - 50 Micron
- Replacement Parts: Pentek 143221 Steel Filter Housing Belly Clamp; Pentek 143218 O-ring
Inspect your Pentek ST-BC-4 Stainless Steel Filter Housing regularly for optimum efficiency and performance. To maintain a good seal, the O-rings should be replaced periodically. A pressure regulator must be used if pressure ever exceeds 125 PSI. Also it is important to protect the housing against freezing to prevent the filter from cracking and resulting water leaks. Make sure to use water that is microbiologically safe and of known quality that is adequately disinfected. This housing is not recommended for applications with TDS or chlorides >1000 ppm and/or pH <5.0. Using this product under these conditions will void the limited manufacturer's warranty.
Pentek ST-BC-4 2" Stainless Steel Filter Housing Product Reviews :
Write a review
Not reviewed yet
Pentek ST-BC-4 2" Stainless Steel Filter Housing More Information:
- Product Inquiry