Skuttle Model 592 Humidifier Cover/Label Assembly
The Skuttle Model 592 Humidifier Cover/Label Assembly is the replacement humidifier component for the following Skuttle systems:
- Skuttle 592-9 Humidifiers
- Skuttle 592-22 Humidifiers
The Skuttle A00-0641-099 is the external Humidifier Cover and Label Assembly replacement part for Skuttle 592-22 and Skuttle 592-9 Humidifiers. Skuttle humidifier systems are designed to be mounted on the supply air plenum just above the cooling coil on a forced-air, gas or fuel oil heating system for an office or a home. This small humidifier sprays water into the supply air stream of heating system. Peak humidifier performance and efficiency depends upon tightness of your home, the hardness of your water, as well as several external factors.
Skuttle Model 592 Humidifier Cover/Label Assembly Specifications:
- Part number: Skuttle A00-0641-099
- Includes 1 humidifier cover and label assembly
- Dimensions: 6-1/2" x 3" x 4-1/2"
- For peak performance and efficiency, replace filter once every 6 to 12 months, depending on use and if there are hard water conditions.
- Replacement part for Skuttle 592-22 and Skuttle 592-9 Humidifiers
For best performance, it is recommended to replace the humidifier evaporator pad every 6 to 12 months, depending on service use. Skuttle may also be referred to as Drumatic in some instances.
Skuttle Model 592 Humidifier Cover/Label Assembly Product Reviews :
Write a review