Quote:
|
Originally Posted by JTinVT
Hi,
Grundfos well pump model 5SQE05A-180 (5 GPM)
Manually calculated flow rate around 6 - 6.5 GPM.
Iron 7 Problem > .3
Manganese .8 Problem > .05
PH 7.5 Problem < 7
Hardness 3 Problem > 6.0
TDS 60 mg/l Problem >400 mg/l
Thanks !
|
If your iron is 7 ppm, then do not use the Kinetico 4060. It is not intended for those levels.
A 2060 or 2100 model would serve you better if you chose to go that route.
I sent you a PM, as well.
Andy Christensen, CWS-II