Well...I'm not sure what to do.
I disconnected the outlet end of the drain and blew through it, and I could see the water coming out of the inlet where the valve assembly sits, so I'm pretty sure it's not clogged.
I've thoroughly cleaned the injector, screen, and valve assembly.
My water pressure meter was reading 48 psi in the line.
Still...I'm getting absolutely no suction in the brine line.
I was going to swap the valve with my neighbor's to see if the problem is truly in the valve, but his bypass valve is messed up and we can't take his off, so that idea didn't work.
I don't know what else to do other than call the service guy again and see if he can fix it, or replace the valve. Either way, it's going to be a couple hundred bucks I guess.
|