Well water with Hardness at 76 mg/L or 4.44gpg
I had a new 2hp well installed with 4 inch galvanised casing around 2 years ago just before I started to build my house. I'm told the well driller went down around 85ft. We move in around 6 months ago and I finally got around to having the water tested (basis tests cleared for my certificate of occupancy by the county building inspector). These were my results:
PH @ 7.6
Hardness @ 76 mg/L
Iron @ 0
Copper @ 0
Chlorine @ 0
I'm also getting the rotten egg smell. I would like to know the best way of softening my water and getting rid of that rotten egg smell.
Thanks for reading and I look forward to any advice.