How do you Clean Guide Pro Filter ?

[FiltersFastEmailQuestions]

After we use the Guide Pro for a trip how do we clean out the filter so the bacteria from the water doesn't grow in the filter while it's not being used?

[Roxanne]

After we use the Guide Pro for a trip how do we clean out the filter so the bacteria from the water doesn't grow in the filter while it's not being used?

This is a great question! First of all, while the filter is still assembled, you will need to run a bleach solution through the filter. Use about 2 tablespoons of bleach to a liter of water and pump it through your Guide Pro. This will clean out any left over bacteria or unwanted contaminents from your hoses and filter. After this is done take the microfilter out and let it air dry. This may take a day or two. Once it's dry you can re-assemble your Guide Pro and store it for next time.

[husle]

The first thing to do is remove the air filter from your quad. If you are using a stock one be sure to remove the steel insert inside the foam before cleaning.

[Water Filtration FL]

Rightly said by Roxxane those steps you should follow to clean your system by your own but still i prefer its better to call specialist for that because they have good tools & materials are updated.