How RO System works?

Hello everyone,

Here is the process shown. Hope you'll like it..!!

# The untreated water passes through a particulate filter, which retains silt, sediments, sand and clay particles that might clog the reverse osmosis membrane.

# After the initial treatment, the water is then channeled to a activated carbon filter that holds minerals and other harmful particles (chromium, mercury, copper, chloramines and pesticides).

# In the third phase, water is transported under pressure in the reverse osmosis module, which only clean water can pass through the pores of the filter. All the impurities are retained and evacuated through the pipe and the treated water is stored in a special tank.

# Finally in the last phase, the treated water passes through an activated carbon filter to improve taste and odor; resulting in fresh and healthy water ready to be used.