Results 1 to 2 of 2

Thread: ro system Pre-filters siquence

  1. #1
    lakiuk is offline Junior Member
    Join Date
    Aug 2010
    Posts
    1

    Default ro system Pre-filters siquence

    Hello all.

    I dont know in what siquence i shpuld fit my pre filters. And what set is the best?

    Option 1: 20 mikron sediment + carbon block + 5micron sediment
    Option2: activated carbot + carbon block + 5 micron sediment


    Wich one is better and in what siquence, or mazbe thez are no good , then wich o should use i have 300 gpd (3x100gpd) membranes with 3 pre filters 10"


    Regards

  2. #2
    Andy CWS is offline Moderator
    Join Date
    Dec 2006
    Location
    Port Clinton, Ohio, United States
    Posts
    750

    Default

    Quote Originally Posted by lakiuk
    Hello all.

    I dont know in what siquence i shpuld fit my pre filters. And what set is the best?

    Option 1: 20 mikron sediment + carbon block + 5micron sediment
    Option2: activated carbot + carbon block + 5 micron sediment


    Wich one is better and in what siquence, or mazbe thez are no good , then wich o should use i have 300 gpd (3x100gpd) membranes with 3 pre filters 10"


    Regards
    Are all three filters before the membrane? If so:
    Option 3: 20-micron, 5 micron, carbon block
    Go from large filter to small filter to carbon

    If two filters are before the membrane and you are on city water, then:
    20-micron, carbon block --- membrane/tank --- activated carbon(GAC)filter.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •