Results 1 to 2 of 2

Thread: Leaking Hydrotech - HELP!

  1. #1
    whalensdad is offline Junior Member
    Join Date
    Jul 2007
    Posts
    1

    Question Leaking Hydrotech - HELP!

    I have a Hydrotech 4 stage R/O undersink system. It has developed a leak at the Inlet valve cover (PN 20500066). So I replaced the shut off assembly (PN 40600010) and the two Inlet Valve cover O'rings (PN 34201024) but it still leaks. (I also replaced all of the filters at the same time). When you look at the top of the Inlet Valve Cover, there is a small proturbance (possibly a weep port or something) and that is where the water is leaking from. I am not sure if I should replace the actual Inlet Port Cover or if there is something else that I should be looking at. The Inlet Port Cover is hard plastic and I find it hard to believe it could go bad. Any help would be appreciated.

    Thanks,
    Lee

  2. #2
    Roxanne is offline Senior Member
    Join Date
    Apr 2006
    Posts
    232

    Default Hydrotech

    Hi,

    The manufacturer, Hydrotech, may be able to offer some assistance with technical support. The number is 800-354-7867.

    Hope this helps!
    Roxanne Crawford
    FiltersFast
    www.filtersfast.com
    866-438-3458

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •