Results 1 to 4 of 4

Thread: In line replacement filter

  1. 04-19-2008, 07:37 PM #1
    Rob
    Rob is offline Junior Member
    Join Date
    Apr 2008
    Posts
    2

    Default In line replacement filter

    I have a Kinetico Mach series(installed in 2006) and need to change out the in line filter. I am having a heck of a time finding the correct one. I believe it is a 20" x 1(does that make sense?) Any assistance would be greatly appreciated.

    Thank-you
    Reply With Quote Reply With Quote
  2. 04-20-2008, 05:54 PM #2
    Andy CWS
    Andy CWS is offline Moderator
    Join Date
    Dec 2006
    Location
    Port Clinton, Ohio, United States
    Posts
    745

    Default

    Try:
    www.filtersfast.com

    It is most likely a sediemtn filter, maybe 20-micron.

    Andy Christensen, CWS-II
    Reply With Quote Reply With Quote
  3. 04-20-2008, 06:03 PM #3
    Rob
    Rob is offline Junior Member
    Join Date
    Apr 2008
    Posts
    2

    Default 20" 1 micron

    Ok the filter is a 20" 1 micron.
    Reply With Quote Reply With Quote
  4. 04-21-2008, 02:26 PM #4
    Andy CWS
    Andy CWS is offline Moderator
    Join Date
    Dec 2006
    Location
    Port Clinton, Ohio, United States
    Posts
    745

    Default

    One-micron is very fine. Most sediment prefilters are are around the 20- to 50-micron rating to allow adequate flow rate and usage life. Even prefilters required in front of UV lamps systems are 5-micron.

    Regardless, those 20" filters are available as a standard.

    Andy Christensen, CWS-II
    Reply With Quote Reply With Quote
« Trickle of Water | Q about Brine »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules