• Shopping Cart
Save 5% when you check out with Auto Delivery!
bbb A+ site secured
Results 1 to 2 of 2

Thread: GE Profile/ no water

  1. #1
    Bob4 is offline Junior Member
    Join Date
    May 2008

    Default GE Profile/ no water

    3 mos old and has quit working. Changed both filters and membrane.
    Took the feed of the storage tank (Under sink) and theres a steady slow trickle of water. What might cause it to not enter the tank ? Pressure ? Tried to see if something was lodged in there. When I poke at it it feels like there a rubber something or other at the top of the tank. I mean less than 1 inch in from the valve top . Is this normal ?
    Any help appreciated.

  2. #2
    Roxanne is offline Senior Member
    Join Date
    Apr 2006

    Arrow Issues w/ System

    It actually sounds like you may have a defective part in there somewhere. I would actually try calling the manufacturer because if your system is only 3 months old it is most likely under some sort of warranty. Technical support can usually help you determine the problem and then either replace any parts necessary or replace the system. Hope this helps.
    Roxanne Crawford


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts