Search:

I will follow your advice and see how it works out.
Thank you Tony

Yes I have a 1.0 cubic foot unit with a max cap of 32k that is correct..
The little salt dial on the back of the unit is set to #6 and is ok for 1 person with 60 gallions per day.
I'm a 74 yr old...

Yes around is 28" and 9" across is right.
If I set the unit gallons to 975 it changes the 1 person and hardness to 27 dose that matter or not.
why can't you set the gallons correct and the 1...

[I have a Flex Model 5600 Econominder watersoftner and I just installed it, and need help in setting it up for 1 person @60 gallons per day.

The meter has setting for Manual 24-Hour Gear, White...

thank you I will follow you advice.....

So that means i would need to add at least another 40lb bag or more to be above the water level is that correct?

I'm still a little confused about brine tank water level.
1. Do I need the grid plate?
2. I did a regen, water level is still above salt pellets about 3". is that ok?
3. As I said in the begining...

ok thank you i will see how that works.

no grid plate came with it. after i regen how log will it take to through the cycle again?

hello again, i filled the brine tank with 2 gallons of water and 1 40lb bag of pellet salt to start it. Resin tank size is 9"x48"
Brine tank size is 18"x33" that left about an 1" of water over...

It is already set at that. how about the other settings like pepole etc. etc.
does drain tube supposed to hold water in it when finished draining, drain is not blocked ??

I have a Flex Model 5600 Econominder watersoftner and I just installed it, and need help in setting it up for 1 person @60 gallons per day.

The meter has setting for Manual 24-Hour Gear, White...