Results 1 to 4 of 4

Thread: OmniFilter RO2000 Series B

  1. #1
    jimmie neutron is offline Junior Member
    Join Date
    May 2010
    Posts
    3

    Default OmniFilter RO2000 Series B

    I guess the best place to start is the beginning, so this might get too lengthy if I don't paraphrase...

    Bought a place about a year ago with filter installed...
    Filter worked fine, water tasted great...
    Had help remodeling kitchen...
    Helpers unhooked filter...
    Helpers tossed old lines...
    (The lines were very disgusting, horrible iron content in water here)

    Just now getting around to attempting to hook it back up. I am 98% sure I have all the new lines ran properly, but I have no water coming out of the faucet at all. (I guess there could be some running thru it to the drain, hard for me to tell)

    This is how I have the lines ran:

    Water supply in to Sediment in.

    Pre-Carbon out to the small side of the auto shut off valve.

    Small side of the auto shut off valve to the screw cap side of the Membrane.

    -After this connection it splits into two lines-

    Grey connection with the little black tube to the small nipple on the faucet.
    (Small leak from the line connection here, by the way)

    White connection to the big side of the auto shut off valve.

    Big side of the auto shut off valve to the "T" connector.

    One side of the "T" connector to the Post-Carbon.

    The other side of the "T" connector to the tank.
    (Tank shows 55lbs of pressure)

    Post-Carbon out feeds the bottom of the post for the faucet.

    The faucet has a large line dumping into the drain.


    If I can get help figuring out why I have no water coming out of the faucet, that would be great... as well as figuring out how to stop that leak I mentioned...

    Any suggestions??

    Thanks!
    ~J

  2. #2
    jimmie neutron is offline Junior Member
    Join Date
    May 2010
    Posts
    3

    Default

    This is the manual I read for the water flow diagram:
    http://www.filtersfast.com/OmniFilter_RO2000_Manual.pdf
    Last edited by Andy CWS; 07-02-2010 at 05:13 PM.

  3. #3
    jimmie neutron is offline Junior Member
    Join Date
    May 2010
    Posts
    3

    Default

    Cancel that... Membrane was/is plugged. For the price of a new one, I could buy an entire newer system.

    Thanks for looking!

    ~J

  4. #4
    husle is offline Junior Member
    Join Date
    Jul 2010
    Posts
    11

    Default

    What a nice sharing i like your post, Omni water filters have been around for more than 20 years and make filtration products for your home.
    When they were founded in 1970, their mission was to make affordable residential h2o filtration products. They are still going strong today which says a lot about the longevity and quality of the company.
    Thanks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •