Results 1 to 4 of 4

Thread: 2 Stage Filter Need to Replace One Side

  1. #1
    mmisko is offline Junior Member
    Join Date
    Mar 2014
    Posts
    2

    Default 2 Stage Filter Need to Replace One Side

    I have a Kenmore 2 Stage system Mod 38641 and one screw on filter holder is cracked. I don't want to purchase a new 2stage system for the replacement, does anyone know where i can get a replacement part for the screw on part only. Thanks in advance.

  2. #2
    Alex is offline Senior Member
    Join Date
    Mar 2009
    Posts
    443

    Default

    Hello,

    I am not aware of if you can find the replacement head for the filter system that you have.

    You can use a different Omnifilter filter head to install to replace the filter.

    You would then be able to use the Omnifilter Q-Series filters which cost as low as $12 per replacement filter. You can find an omnifilter replacement that will meet or exceed the Kenmore filters.

    What model filter does it use?

    Thanks,
    Alex

  3. #3
    mmisko is offline Junior Member
    Join Date
    Mar 2014
    Posts
    2

    Default

    Does Omnifilter make Kenmore. I use Kenmore filter mod 34377.

  4. #4
    Alex is offline Senior Member
    Join Date
    Mar 2009
    Posts
    443

    Default

    Kenmore is made by another company, But i am not sure whole makes your system.

    If you need parts, it would be best to replace the entire system. I would recommend something that uses common, non-proprietary filters and parts - but that also meets or exceeds your current systems filtration ratings.

    Pentek - US-1000

    A replacement set of filters would be about $20 to $25 - Pentek P-250a

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •