Autotrol 460i help needed please!
I have an autotrol 460i water softerner that I am having problems with at the moment and wondered if any of you had any experience with this machine>?.
the probem is that it is nearly full up with water to the drain level, I have cleaned the injector and filter and also the air valve, the 2 main flappers looked alright but did have a gentle imprint of the shut off valve on them so I turned them around.
I re-started the machine as per the manufacturers guidelines and the water level about the salt should be approx an 1" above it, but it kept rising to just under the drain off level, is there any likely simple fixes to this machine, please bear with me, but this type of machine is new to me so is abit of a learing curve!.
Many thanks for any guidance and advice.