![]() |
|
#1
|
|||
|
|||
|
I live west of Orlando in Howey in the Hills, FL zip 34737. Clermont, FL is also nearby. I have a well and the water produces rust on faucets, showerheads, toliet bowls.
What filter system would be best for this situation, so the water would be suitable for bathing, showering and possibly drinking. |
|
#2
|
|||
|
|||
|
As in all cases, get a water analysis to determine your raw water condition. Look for hardness, iron, TDS, Sulfur (if you have rotten egg smell) at least.
How long have you lived there. How old is the house. Had there been any water treatment equipment install (and removed) before you lived there? Do your neighbors have similar problems. In most cases a softener and an RO will handle typical water concerns. It might be good to get a test through a certified lab for health issues if you haven't already. They normally check for e. coli and coliform. If that test is positive, then there are several options you can take. Andy Christensen, CWS-II |
|
#3
|
|||
|
|||
|
You also need to test for pH and manganese (if possible).
__________________
Gary Slusser 22 yrs in water treatment and well pumps, 13 yrs helping people on the 'net to help themselves. |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|