Results 1 to 2 of 2

Thread: Pentek R30 or smaller?

  1. #1
    hobbes is offline Junior Member
    Join Date
    Nov 2006
    Posts
    1

    Default Pentek R30 or smaller?

    I have an AquaPure filter housing and the prior owner left a bunch of USFilter R30 cartridges which are now running out. As near as I can tell, the USFilter R30 replacement are now Pentek R30 (155017-43). Should I just get more of these, or should I consider something else (e.g., 1-5 micron filter, string-wound, etc.)? Thx.

  2. #2
    rscardigno is offline Administrator
    Join Date
    Mar 2006
    Location
    Charlotte, North Carolina, United States
    Posts
    76

    Smile Pentek, US Filter R30

    You are correct, the correct part for you is the R30 at http://www.filtersfast.com/Pentek-R30-water-filters.asp. As far as changing filters goes, are you happy with the R30? You are using a 30 micron filter so if you feel like your water quality could be better, than you may try a 10 micron like the one at http://www.filtersfast.com/Pentek-PD-10-934-filter.asp. If you feel like you are changing the filter too frequently, you can try a higher micron like the r50 at http://www.filtersfast.com/American-...er-filters.asp. If you are one a well, then your micron level should not be dropped too low as you will end up changing filters very frequently, but if you are on city water, you may consider a carbon filter for chlorine, chloramine reduction. Please let us know if you have any questions.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •