The 3M Aqua-Pure AP124 Whole House Standard Sump Cartridge 2-Pack is a standard 2.5" diameter drop-in cartridge set that is manufacturer tested and verified to reduce sediment down to 50 micron nominal. Its rigid construction of proprietary polypropylene manufacturing process, helps to eliminate "unloading" of sediment due to variances in water pressure, sometimes referred to as water hammer. The AP124 is also known as part number 5620601 and 56206-01.
3M Aqua-Pure AP124 Whole House Standard Sump Cartridge 2-Pack Specifications:
Part Number: AP124
Model Number: 5620601
3M ID Number: 7000051058
Filter Life: 6 months
Filter Media: Polypropylene
Micron Rating: 50
Dimensions: 9 3/4" x 2 1/2"
Maximum Water Temp: 170°F
Flow Rate: 8 gallons per minute (30.3 lpm)
Made from FDA (CFR 21) Compliant Materials
Graded density for long life (Up to 30% longer life)
The 3M Aqua-Pure AP124 can be used in 3M Aqua-Pure AP11, AP11S, AP11T, AP101, AP101S, AP101T, AP12, AP12T, AP12S, AP102, AP102T, AP102S, AP1610/2610 and SS1 through SS36 filter systems and any other filter system that calls for a standard size (9 3/4" X 2 5/8") small diameter 50 micron filter such as Ametek, Filterite, Pollenex, Sears and Water Pik.
Customer Reviews:
There are no reviews for this product yet!
The Hydronix 10" Sediment Filter Cartridge SDC-25-1050 is the same 50 Micron rated water filter cartridge as the Liquatec SDF-25-1050 Sediment Filter. Made with 100% polypropylene, this sediment cartridge is resistant to chemicals and reduces waterborne contaminants like rust, silt, sediment and sand. This Hydronix water filter has four layers, outside-in flow and step-by-step 50 microns that effectively retain particles while extending the life with a lower pressure drop.
Also known as part number SDC-25-1050, this sediment filter is widely used as pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon (GAC) filters. Made with 100% polypropylene, this filter is resistant to chemicals and reduces waterborne contaminants like sediment, silt, rust and sand. The graded density of the Hydronix 10" filter cartridge provides a higher dirt holding capacity over standard spun polypropylene and string wound cartridges. The operating temperature of this cartridge is 40 degrees to 145 degrees Fahrenheit.
Hydronix SDC-25-1050 Water Filter Cartridge Specifications:
Replacement for Liquatec SDF-25-1050 Sediment Filter
In addition to replacing the Liquatec SDF-25-1050 filter, this Hydronix sediment water filter is an economical replacement filter for the Watts 10" Sediment Water Filter - 50 Micron. The Hydronix polypropylene water filter cartridge will fit filter housings requiring a standard 10" sediment filter cartridge such as Pentek, US Filter, American Plumber, Ametek, Culligan and other standard housing systems. For optimum performance of your filtration system, change your filter cartridge every 6 months based on usage and water quality. Without adequate disinfection, do not use this Hydronix 10" sediment cartridge filter with microbiologically unsafe water.