Filbur FC-3960 Watkins 65 Pool and Spa Filter

FC-3960

$39.99
Retail:~~$43.28~~
You Save: 8%

Ships by Tomorrow 9/29/2016

The Filbur FC-3960 is a compatible replacement for the following pool and spa filters:

Watkins 65
Hot Springs Spas 31114
Tiger River Spas 31114
Unicel C-8465
Pleatco PWK65
Aladdin 16506

Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally-bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow.

All Filbur pool and spa filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes such as bacteria, mold, fungi and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur brand pool and spa filters.

The Filbur FC3960 product specifications:

3 oz.
Length: 10 1/2"
Diameter: 8 1/2"
Top: 3" Open
Bottom: 3" Open
Square Feet: 65

The Filbur FC-3960 works with hot tubs, pools, spas and filters made by Watkins Mfg., Hot Springs Spas and Tiger River Spas.

Cleaning your Filbur Pool and Spa Filters

It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed.
In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water.
Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter.
DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.