Please provide your e-mail address below to receive a notification when this product becomes available:X
Thanks! We'll send you a notification when this product is available!
Culligan HF-150A Whole House Water Filter Housing
The Culligan Water Filter Housing HF-150A accommodates standard size small 10" sediment or carbon water filters (roughly 10" x 2 3/4") made by Culligan, Pentek, Ametek, American Plumber, Omnifilter and more (filter cartridge not included).
This Culligan filter housing is generally used as a whole house water filter, and is often used before water heaters or water softeners to filter the water going into these appliances. Not only will your filtered water be cleaner and taste better, but you will extend the life of your equipment by reducing the sediment entering the appliances.
Depending on the water filter cartridge you install in it, this filter housing can reduce sediment, chlorine, and many more contaminants. This Culligan filter housing is used on 3/4" main water lines (cold only) at the point of entry. Sitting atop the filter housing cap is a red pressure relief button, which vents excess pressure inside the housing to make installing Culligan replacement filter cartridges a breeze.
Culligan HF150A Filter Housing Specifications:
- Temp. Range: 40 - 100 F
- Press. Range: 30 - 125 PSI
- Pressure Relief Valve
- 3/4" Female Pipe Threads (3/4" compression fittings not included)
This Culligan HF-150A is tested and certified by NSF International to NSF / ANSI Standard 42 for material and structural integrity requirements. Culligan has been a trusted water filtration brand since 1936. This is a genuine Culligan filter housing is also known as HF150.
Get Culligan water treatment without calling the Culligan man!
Need to know how to install a whole house water filter housing or how to replace Culligan filters? Check out this Culligan product manual for more information.