Filtrete Large Capacity 30 Micron Pleated Filter 3WH-HDPL-F01

The Filtrete Large Capacity 30 Micron Pleated Filter 3WH-HDPL-F01 is a whole house water filter that is ideal for large capacity applications. This Filtrete replacement filter features a 30 micron rating and pleats that capture sediment and other contaminants in drinking water. This pleated water filter can also be used in pre-filtration applications to trap larger particles.

Specifications:

• Brand: Filtrete
• Part Number: 3WH-HDPL-F01
• Dimensions: 10" x 4.5" (Actual Size: 9. 7/8 x 4.5" )
• Flow Rate: 10 gpm
• Large capacity
• Pre-filtration
• 30 micron rating
• Pleated water filter cartridge
• Model number 3WH-HDPL-F01
• Reduces sediment and other particulates

Fits In These Applications:

The Filtrete 3WH-HDPL-F01 water filter can be used in the following applications:

• Whole house sump system drop-in replacement filter

The Filters Fast® FF10BBPS-30 Replacement for Pentek R30-BB is a hard-working, heavy duty filter designed for whole house use. Engineered with a superb 30-micron rating, the FF10BBPS-30 reduces dirt, sand, scale, rust, and other particles that are trapped before moving throughout your home's plumbing. The 30-micron filtration level also helps protect fixtures and appliances that use running water from sediment and scale particle build up.

Specifications:

• Brand: Filters Fast®
• Part Number: FF10BBPS-30
• Replaces Part Number: R30-BB
• Micron Rating: 30
• Flow Rate: 10 GPM
• Filter Media: Pleated Polyester
• Filter Life: 6 months (depending on water quality)
• Dimensions: 9 3/4" x 4 1/2"
• Temperature range: 40 to 125 ° F
• Reduces dirt, sand, rust, and scale particles

How do you install the Filters Fast® Replacement for Pentek R30-BB?

1. Turn off water supply. Press red pressure-relief button (if present).
2. Unscrew housing. Remove large o-ring, wipe clean and set aside.
3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
7. Insert new filter cartridge.
8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.Most fit issues result from either an old cartridge o-ring that fell off when removing the old cartridge, or failing to get the standpipe lined up when hand tightening the housing.

How often should you replace the Filters Fast® Replacement for Pentek R30-BB?

• Changing your Filters Fast® Replacement for Pentek R30-BB is a very quick and easy process that should be done once every six months.

What contaminants does the Filters Fast® Replacement for Pentek R30-BB reduce?

The Filters Fast® Replacement for Pentek R30-BB reduces the following contaminants:

• Dirt
• Sand
• Rust
• Scale Particles

Customer Reviews

Total Reviews: 3 | Average Rating: 4.7 / 5.0

Nancy Parsons2023-02-09

It doesn’t come with the rubber gasket rings like some other brands but it works fine.

Collected by Trustpilot.com

Robert Cobleigh2022-02-12

Great for whole home sediment filtration

Collected by Trustpilot.com

KmJohnson2021-03-26

Perfect fit for my whole house filter system.

Collected by Trustpilot.com