Your Shopping Cart is empty.
Give it purpose - fill it with water filters, air filters, refrigerator filters, and more.
The Hydronix SDC-45-1001 fits the following industrial and whole house water filter housings:
The Hydronix 10" Large Sediment Filter is an economical equivalent of the Liquatec SDF-45-1001 Filter. This Hydronix 1 Micron filter is also known as part number SDC-45-1001. Made of 100% pure polypropylene, this filter is resistant to chemicals and reduces waterborne contaminants like sand, silt, rust and sediment. The Hydronix Large Sediment Filter provides a higher particulate filtering capacity compared to standard spun polypropylene and string wound water filter cartridges.
By utilizing the 4 separate layers of micron filtration, the outside-in flow allows the outer layer to trap larger sized particles, which results in a much lower pressure drop compared to conventional filters. The coreless design of this Hydronix 4 1/2x10 Sediment Filter is a cost-effective solution to pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon filters (also known as GAC filters). This Large Sediment Filter is ideal for residential, industrial, commercial and food service applications.
Hydronix 1 Micron Filter specifications:
It is tested and certified by NSF International to ANSI/NSF Standard 42 for material requirements only. For optimum performance, replace your Hydronix Sediment Filter every 6 months, depending on usage and water quality. The operating temperature range for this Filter is 40 degrees to 145 degrees Fahrenheit (4.4 to 62.8 degrees Celsius). Do not use this sediment filter with water that is microbiologically unsafe or of unknown quality without adequate disinfection. Check out our full line of 10 inch Sediment Filters: 10 inch Large Sediment Filters