Hydronix 40" Sediment Filter Cartridge - 10 Micron 20-Pack
Free Shipping on orders over $99 FREE 365-DAY RETURNS
Filters Fast Logo
Free Shipping Item Banner
365 Day Return Guarantee

Hydronix 40" Sediment Filter Cartridge - 10 Micron 20-Pack

SDC-25-4010

$163.60
Only $8.18 per Filter
Retail: $259.80 /ea
You Save: 37%
As low as
$163.60
Retail: $259.80
You Save: 37%
Details

The Hydronix 40" Sediment Filter Cartridge 20-Pack is the same 10 Micron filter as the Liquatec SDF-25-4010 Filter. This filter has 4 separate layers of micron filtration and the outside-in flow allows the outer layer of this sediment depth filter to trap larger sized particles, resulting in a lower pressure drop, compared to conventional filters. The Hydronix 40" Sediment Filter is commonly used as pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon filters (also known as GAC filters).

The Hydronix 40" Sediment Cartridge Filter is resistant to chemicals and reduces waterborne contaminants like sand, rust, silt and sediment. Also known as part number SDC-25-4010, this filter is ideal for a wide range of commercial, residential, food service and industrial applications. Made of 100% polypropylene, the Hydronix water filter is tested and certified by NSF International under ANSI/NSF Standard 42 for material requirements only. The temperature capacity of this sediment filter ranges from 40 degrees to 145 degrees Fahrenheit.

Hydronix 40" Sediment Depth Cartridge Specifications:

  • 10 micron filter
  • 100% Polypropylene
  • Dimensions: 2 1/2" x 40"
  • Flow rate: 0.3 psi@ 20 gpm
  • Replace filters every 6 months
  • Reduces waterborne contaminants
  • Certified NSF Standard 42/FDA approved
  • Fits filter housings requiring 2 1/2" x 40" media
  • Liquatec SDF-25-4010 Sediment Filter replacement

Do not use this sediment filter with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The graded density of this Hydronix 40" water cartridge provides higher dirt holding capacity than standard spun polypropylene and string wound cartridges. This sediment filter is adhesive free, binder free and surfactant free. Replace your 5 micron filter every 6 months based on water quality and usage, for optimum performance. Be sure to double check the size of your filter before purchasing. Check out our full line of 40" Sediment Filters: 40" Inch Sediment Filters

Price is for a 20-Pack of replacements




Product Availability

Please provide your e-mail address below to receive a notification when this product becomes available:

X
X

Thanks! We'll send you a notification when this product is available!

Get Help and Support Need Help?
X