Hydronix 10" Pleated Sediment Filter - 50 Micron
You Save: 39%
Hydronix 10" Pleated Sediment Filter is the economical replacement for the Liquatec SPF-25-1050. Constructed from durable non-woven polyester, the media around the polypropylene core is pleated for additional strength and the ends are immersed in a thermo setting vinyl plastisol. By embedding and sealing each end of the pleat, the three components are fused together to form a unified end cap and gasket. This sediment water filter effectively reduces waterborne particles and contaminants like sand, rust, silt and sediment as small as 50 microns.
In addition to replacing the Liquatec SPF-25-1050, the Hydronix pleated cartridge also replaces Pentek 255484-43, Pentek 155038 and Watts FM-50-975. With a high flow rate of 10 gallons per minute, this sediment water filter has high dirt holding capacity that extends the time between filter changes. Also known as part number SPC-25-1050, this Hydronix filter is resistant to bacteria and chemicals. Water that is of unknown quality or microbiologically unsafe should not be used with this filter without adequate disinfection.
Hydronix 10" Sediment Pleated Cartridge specifications:
- 50 micron filter
- Part number SPC-25-1050
- Flow rate: 1 psi @ 10 gpm
- Dimensions: 2 1/2" x 9 7/8"
- Fits 10" standard filter housings
- Reduces waterborne particles and contaminants
- Maximum temperature capacity: 125 degrees Fahrenheit
- Replaces Liquatec SPF-25-1050, Pentek 255484-43, Pentek 155038 and Watts FM-50-975
The temperature capacity ranges from 40 degrees to 125 degrees Fahrenheit (4.4 to 51.7 degrees Celsius). The Hydronix SPC-25-1050 filter is washable, reusable and durable. This pleated water filter fits standard water filter housings requiring a 10" x 2 1/2" media and is ideal for a variety of residential, commercial and industrial applications.
See our complete line of 10" Sediment Filters: 10 Inch Sediment Filters
Hydronix 10" Pleated Sediment Filter - 50 Micron Product Reviews :Write a review
- Not reviewed yet