Please provide your e-mail address below to receive a notification when this product becomes available:X
Thanks! We'll send you a notification when this product is available!
Hydronix SDC-25-1050 Replacement for Watts FPMB50-978
The Hydronix SDC-25-1050 Replacement for Watts FPMB50-978 is made with 100% polypropylene. This sediment cartridge is resistant to chemicals and reduces waterborne contaminants like rust, silt, sediment and sand. This Hydronix water filter has four layers, outside-in flow and step-by-step 50 microns that effectively retain particles while extending the life with a lower pressure drop.
The SDC-25-1050 is widely used as pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon (GAC) filters. Made with 100% polypropylene, this filter is resistant to chemicals and reduces waterborne contaminants like sediment, silt, rust and sand. The graded density of the Hydronix 10" filter cartridge provides a higher dirt holding capacity over standard spun polypropylene and string wound cartridges.
- Brand: Hydronix
- Part Number: SDC-25-1050
- Replaces Part Number: FPMB50-978
- Pack Size: 1
- Filter Life: 6 months
- Dimensions: 9 7/8" x 2 1/2"
- Micron Rating: 50
- Flow Rate: 0.2 psi @ 5 gpm
- Operating Temperature: 40 F to 145 F
- NSF Certification: Standard 42
The Hydronix SDC-25-1050 Replacement for Watts FPMB50-978 is the correct replacement for the following part numbers:
- FiltersFast FF10SW-50
- Watts FPMB50-978
- Watts PWMB10M50
- Liquatec SDF-25-1050
The Hydronix SDC-25-1050 Replacement for Watts FPMB50-978 is correct replacement for the following model numbers:
- Any housing requiring a 10"x 2.5" filter
- Filter housings using a standard 10" filter