The FiltersFast FFDG-10BB-5 Replacement for Pentek DGD-5005 is an inexpensive water filter that simultaneously works as a pre- and post-filter to reduce extra fine silt, dirt, sand, rust, and scale particles from your tap water. The outer layer of the this whole house water filter has an impressive 5-micron rating, that has the muscle to sift out most of the larger sediment from your water. Once that process is completed, the water then passes through the smaller 5 micron inner layers to filter the finer sediments that are not visible by the human eye. This process extends the life of the filter by spreading out the sediment load and eliminates the need for a dual filter housing setup. The FFDG-10BB-5 has as much as three times the dirt holding capacity as similar sized wound filters.

Specifications:

• Brand: FiltersFast
• Part Number: FFDG-10BB-5
• Replaces Part Number: DGD-5005
• Dimensions: 4-1/2" x 9-7/8"
• Filter Life 6 months
• Filter Media: Polypropylene
• Flow Rate: 10 gpm
• Capacity: 8,000 gallons (depending on water quality and usage)
• Filter Rating: 5 micron
• Reduces Sand, Dirt, Silt, Rust and Scale Particles

Compatible Parts:

The FiltersFast FFDG-10BB-5 is the correct replacement for the following part numbers:

The Pentek DGD-5005 Dual-Gradient sediment filter is rated to filter down to 5 microns. The Pentek DGD-5005 is made for the Pentek Big Blue Filter Housings and will fit into any 10" 'Big Blue style filter housing. The Pentek DGD Series Sediment Filters feature high dirt-holding capacity compared to similar size sediment filters and will reduce sediment particles as small as 5 microns without imparting taste, odor, or color to your water. The Pentek DGD series are chemically and bacterially resistant due to their polypropylene construction.

Specifications:

• Part Number: DGD-5005
• Operating Temperature: 40 - 145°F
• Dimensions: 4-1/2"x9-7/8"
• Flow Rate: 10 GPM @ < 1 psi
• Micron Rating: 50 Micron Outer Layer, 5 Micron Inner Layer
• Reduces Sand, Dirt, Silt, Rust and Scale Particles
• NSF Tested & Certified for Material Requirements

Resources:

• Data Specification Sheet

Compatible Parts:

The Pentek DGD-5005 is the correct replacement for the following part numbers:

Compatible Models:

The Pentek DGD-5005 is correct replacement for the following model numbers:

California Residents: Prop 65 Warning

Customer Reviews

Total Reviews: 1 | Average Rating: 5 / 5.0

Doug Starns2012-10-03

This is a great filter. We have extra fine clay silt in our well water, that the usual 20 micron filter won't catch. This filter seems to catch everything, and doesn't clog up any faster than a 20 micron filter. In short, a much better job for about the same cost.

Collected by FiltersFast.com