Filbur FC-2969, Waterway Pool150 Pool & Spa Filter

FC-2969

The Filbur FC-2969, Waterway Pool150 Pool & Spa Filter replaces Unicel part number C-9403, Harmsco part number H-9403, and Pleatco part number PWW 150. Also known as part numbers FC2969, Waterway Pool 150, Clearwater Pool, 817-0150, C9403, H9403, and 111833.

The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps.

All Filbur Pool & Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool & Spa filters.

The Filbur FC-2969 Product Specifications:

Length: 25 1/4"
Diameter: 10"
Top: Open 5 15/16"
Bottom: Open 6 1/16"
Square Feet: 150

The Filbur FC-2969 is compatible with hot tubs, pools and filters made by Leisure Bay, Rec Warehouse, Waterway Plastics and others. Original Manufacturer part number 817-0150 and 111833.

Cleaning your Filbur Pool and Spa Filters

It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed.
In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water.
Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter.
DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.