Everpure A-11 10" Utility Filter Housing
EV910002
The Everpure A-11 10" Utility Filter Housing replaces following housing unit:
- EV910001 Everpure A-10 10" Utility Filter Housing Unit
- All Older Everpure Model A-10 Housings Opaque bowl with mounting bracket
The Everpure A-11 10" Utility Filter Housing is an opaque bowl with mounting bracket used to house any pre-filter cartridge for 10 in. bowl drop-in water filtration systems. The Everpure filter housing bowl is perfect for use in high-particulate water conditions to reduce dirt, rust and sediment. The Everpure opaque filter housing’s versatile basic design accommodates many applications, including the foodservice industry requiring pre-filtration and for use in high sediment areas.
Everpure A-11 10" Utility Filter Housing Specifications:
- Part Numbers: EV910002 or EV9100-02
- Includes 1 housing unit
- Holds any 10" drop-in filter or softening cartridge
- Installs vertically so bowls hang down
- Easy-to-handle cartridge change outs
- Flow Rate: 5 GPM
- Working Pressure: 10-125 psi
- Temperature Rating: 35-100 degrees Fahrenheit
- Product Dimensions: 13.5 in. high x 4.38 in. wide x 4.38 in. diameter
Install vertically so bowls hang down. Allow 2-1/2" clearance below the cartridge for easy cartridge replacement. Inspect the O-ring during each cartridge change for sufficient lubrication. Always screw on bowls by hand. Do not use a housing wrench. The 10" filter should be replaced when dirt has penetrated through to the inner core of the cartridge. Lubricate and/or replace the O-ring if necessary. Inspect filter cartridge periodically to determine dirt load.
Everpure A-11 10" Utility Filter Housing Product Reviews :
Write a review
