The Everpure IN-10CC GAC/Phosphate Filter is a replacement for the following product:
The Everpure IN-10CC GAC/Phosphate Carbon Filter is ideal to polish water for residential espresso, low-volume single pot coffee brewers, ice-maker and refrigerator applications with flow rates up to 0.75 gpm. This effective filter reduces sediment, dirt and other contaminants down to 5 microns to produce great tasting, clean drinking water.
The Everpure IN-10CC Filter Cartridge contains calcite and coconut shell granular activated Carbon Block for enhanced reduction in chlorine taste and odor. Calcite acts as a mineral feed for flavor additive and raising TDS. The Everpure IN-10CC filter's hexametaphosphate crystals inhibit the formation of limescale, which can shorten the life of equipment.
Everpure IN-10CC GAC/Phosphate Filter Cartridge Specifications:
The Everpure 10" inline filter's compact design allows it to be installed out of sight behind the equipment. In addition, the Everpure EV9100-71 water filter can be used for Reverse Osmosis post water treatment also. If you are concerned about increasing the pH in your drinking water, this is the perfect solution as a reverse osmosis polishing filter that will slightly increase the pH of your drinking water.
The Everpure EV910071 10" inline filter should be changed on a regular 6 month preventative maintenance program. Change cartridges when capacity is reached or when pressure falls below 10 psi. Always flush the EV9100-71 filter cartridge at time of cartridge change and installation by running water through the cartridge for three minutes at full water flow.