GE Merlin Smart Pump for Tankless RO Water System
The GE Merlin Smart Pump for Tankless RO Water System is a water pump for use in the GE Merlin Tankless Reverse Osmosis System. This booster pump can be used on the supply line and increases line pressure up to 60 psi. This part is strongly recommended for the GE Merlin system in order to achieve the best results.
This smart pump is built for reverse osmosis systems and works on water pressures at a minimum of 40 psi and a maximum of 80 psi. Installing a pressure reducing valve in the water supply pipe of the RO system can reduce water pressure if needed. Overall this booster pump increases the flow of water and improves TDS (total dissolved solids) quality.
This pump requires special fittings for the inlet and outlet ports and 2 fittings are required per pump: the Aquatec QTS-556 (1/2 inch, male connector, 2 pack), the Aquatec QJE-554 (1/2 inch, straight, John Guest style connector), and the Aquatec QJS-554 (also 1/2 inch and John Guest style connector, elbow).
GE Merlin Smart Pump for Tankless RO Water System specifications:
- Inlet/Outlet: 3/4" port opening
- Flow rate: 3.0-4.0 gpm @65 psi
- Max. temp: 140 F
- Voltage: 110v
- Length: 7.28"
- Height: 3.93"
- Width: 5.25"
GE Merlin Smart Pump for Tankless RO Water System More Information: