Hayward C-120 Pool Filter Compat., Filbur FC-1210
(FC-1210)
This Filbur FC-1210 replaces the Hayward C-120 Pool Filter, as well as OEM part C120-RE, the Unicel C-4312 and the Pleatco PA12 swimming pool filters.
This Filbur swimming pool filter matches or exceeds the quality of the original Hayward filter cartridge. Filbur pool filters are made of Reemay spunbound polyester pleated filter media with thermally-bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. Rest assured you are getting a filter that is compatible to the Hayward pool filters, but for a more economical price.
Filbur FC1210 / Hayward C120 Product Specifications:
- Length: 11 7/8"
- Diameter: 4 5/8"
- Top: 2 1/16"
- Bottom: : 2 1/16"
- Square Feet: 12
- 3 oz
Cleaning your Filbur Pool and Spa Filters
It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed.
In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water.
Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter.
DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Product Reviews :
Write a review
Miscellaneous :
Email a Friend
Product Inquiry
|
|
Related Products :
Category : Pool and Spa Filters
Category : Filbur
|
