The Hydronix 10" Sediment Filter is the identical replacement for the Liquatec SDF-45-1050 Filter. This water filter is resistant to chemicals and reduces waterborne contaminants like rust, silt, sand and sediment. The graded density of this 100% polypropylene filter provides higher dirt holding capacity than standard spun polypropylene and string wound cartridges. Also known as part number SDC-45-1050, the Hydronix 10" filter is a 50 micron filter that is surfactant free, adhesive free and binder free. In addition to replacing the Liquatec SDF-45-1050 cartridge, this Hydronix sediment filter is an economical replacement filter for the Pentek 155357-43 and the Watts FPMB-BB50-10 Water Filter.
Integrated with true multi-stage depth filtration, the Hydronix Sediment Filter is ideal for commercial, residential, industrial and food service applications. Using 4 separate layers of micron filtration, as the outside-in flow allows the outer layer to trap larger sized particles, this large water filter results in a much lower pressure drop compared to conventional filters. The coreless design is an inexpensive solution to pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon filters (also known as GAC filters).
Hydronix 10" Sediment Filter specifications:
The Hydronix Sediment Depth Cartridge is tested and certified by NSF International under ANSI/NSF Standard 42 for material requirements only. This cartridge fits filter housings requiring 10" media. Make sure that you check the size of your filter before purchasing. For optimum performance, change your filter every 6 months, based on water quality and usage. The operating temperature capacity ranges from 40 degrees to 145 degrees Fahrenheit (4.4 to 62.8 degrees Celsius). Avoid using water that is microbiologically unsafe or of unknown quality without proper disinfection. Check out our full line of 10" Sediment Filters: 10 Inch Sediment Filters