Don't Miss Out on Exclusive
Promotions and Discounts!
By signing up for our
Free Newsletter, you'll receive
exclusive promotions, discounts
and more directly to your inbox
We respect your privacy .
Filters Fast
Shipping Specials at Filters Fast
  • Filters Fast
  • All Water Filters and Air Filters
  • Contact Filters Fast
  • Your Filters Fast Account
  • CartCart
  • Checkout
Filters Fast on FacebookFilters Fast on Twitter

Hydronix 20" x 4.5" Sediment Filter - 5 Micron

SDC-45-2005


Hydronix 20" x 4.5" Sediment Filter - 5 Micron
$22.50/ea
Retail:$25.19
You Save: 11%
Quantity

in stock
Ships by Tomorrow 9/2/2014

The Hydronix SDC-45-2005 replaces the following sediment water filters:

  • Liquatec SDF-45-2005
  • Watts FPMB-BB5-20

The Hydronix 20" Sediment Filter is resistant to chemicals and reduces waterborne contaminants like rust, sediment, silt and sand. Made of 100% polypropylene, the graded density provides a higher dirt holding capacity than standard spun polypropylene and string wound cartridges. This 5 micron filter, also known as part number SDC-45-2005, is ideal for food service, residential, industrial and commercial applications. Constructed with a coreless design, this Sediment Filter is surfactant free, binder free and adhesive free.

This sediment filter uses 4 separate layers of micron filtration, as the outside-in flow allows the outer layer to trap larger sized particles. The true multi-stage depth filtration of this filter cartridge is an inexpensive solution to pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon filters (also known as GAC filters). Do not use this filter with water that is of unknown quality or microbiologically unsafe without adequate disinfection before or after the system.

Hydronix 20" Sediment Filter specifications:

  • 5 micron filter
  • Low pressure drop
  • 100% polypropylene
  • Dimensions: 4 1/2 inches x 20 inches 
  • Flow rate: 1 psi @ 20 gpm
  • Certified to NSF standard 42
  • Replace filter every 6 months
  • Reduces waterborne contaminants
  • Fits housing systems requiring 20 inch filter media
  • Replacement for Liquatec SDF-45-2005 and Watts FPMB-BB5-20
  • Maximum operating temperature: 145 degrees Fahrenheit (62.8 degrees Celsius)

This Hydronix 5 micron sediment filter is tested and certified by NSF International under ANSI/NSF Standard 42 for material requirements only. It has a much lower pressure drop compared to conventional filters. The operating temperature capacity ranges from 40 degrees to 145 degrees Fahrenheit (4.4 to 62.8 degrees Celsius). Replace your filter every 6 months for maximum performance, based on usage and water quality. Be sure to measure the size of your filter before purchasing. This Hydronix Water Filter fits many housing systems requiring a 20 inch filter media. Check out our full line of 20 inch  Sediment Filters: 20 Inch Sediment Filters



 

Hydronix 20" x 4.5" Sediment Filter - 5 Micron Product Reviews :

Write a review
  • Not reviewed yet
  • Hydronix 20" x 4.5" Sediment Filter - 5 Micron More Information:

  • Product Inquiry