Filters Fast
Shipping Specials at Filters Fast
  • Filters Fast
  • All Water Filters and Air Filters
  • Contact Filters Fast
  • Your Filters Fast Account
  • CartCart
  • Checkout
Filters Fast on FacebookFilters Fast on Twitter
Hydronix 40" Sediment Filter Cartridge - 5 Micron

Hydronix 40" Sediment Filter Cartridge - 5 Micron
$9.99/ea
Retail:$11.44
You Save: 13%
Quantity

in stock
Special Order. Ships in 14 days.

The Hydronix 40" Sediment Filter Cartridge is an economical replacement for the Liquatec SDF-25-4005 Filter. Also known as part number SDC-25-4005, this Hydronix 5 micron water filter has 4 separate layers of micron filtration and the outside-in flow allows the outer layer of this sediment depth cartridge to trap larger sized particles, resulting in a lower pressure drop. It is resistant to chemicals and reduces waterborne contaminants like silt, rust, sand and sediment. Constructed with 100% polypropylene, the Hydronix 40" sediment filter is ideal for a wide range of residential, industrial, commercial and food service applications.

The Hydronix SDC-25-4005 filter is tested and certified by NSF International under ANSI/NSF Standard 42 for material requirements only. This filter is widely used as pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon filters, also known as GAC filters. The graded density of this Hydronix filter provides higher dirt holding capacity than standard spun polypropylene and string wound cartridges. The temperature capacity range for this 5 micron filter is 40 degrees to 145 degrees Fahrenheit.

Hydronix SDC-25-4005 Sediment Filter specifications:

  • 5 micron filter
  • Resistant to chemicals
  • Dimensions 2 1/2" x 40"
  • 100% Polypropylene media
  • Flow rate: 0.3 psi@ 20 gpm
  • Replace filters every 6 months
  • Certified NSF Standard 42/FDA approved
  • Fits filter housings requiring 2 1/2" x 40" media
  • Temperature capacity range: 40 degrees to 145 degrees Fahrenheit
  • Liquatec SDF-25-4005, Pentek 155422-43 and Watts FPMB5-40 Sediment Filter replacement

This Hydronix 2.5x40 inch sediment filter cartridge is adhesive free, binder free and surfactant free. It fits filter housing systems requiring a standard 2 1/2" x 40" media. Based on water quality and usage, replace your Hydronix 5 micron filter every 6 months for optimum performance. Be sure to double check the size of your filter before purchasing. In addition to replacing the Liquatec SDF-45-4005 filter cartridge, this Hydronix sediment water filter is an economical replacement filter for the Pentek 155422-43 and the Watts FPMB5-40 Sediment Water Filter. Check out our full line of 40" Sediment Filters: 40" Inch Sediment Filters


 

Hydronix 40" Sediment Filter Cartridge - 5 Micron Product Reviews :

Write a review
  • Not reviewed yet
  • Hydronix 40" Sediment Filter Cartridge - 5 Micron More Information:

  • Product Inquiry