The Hydronix 40" Sediment Filter Cartridge is the same economical replacement for the 75 micron Liquatec SDF-25-4075 Sediment Water Filter. The 4 separate layers of micron filtration and the outside-in flow allows the outer layer of this sediment depth cartridge filter to trap larger sized particles, resulting in a lower pressure drop compared to conventional filters. This 2.5x40 inch water filter cartridge is binder free, surfactant free and adhesive free. The Hydronix 2.5x40 filter is component certified NSF Standard 42/FDA approved.
The Hydronix 40" Sediment Depth Cartridge is resistant to chemicals and reduces waterborne contaminants like rust, sediment, silt and sand. Also known as part number SDC-25-4075, this Hydronix cartridge filter is widely used as pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon filters (also known as GAC filters). The Hydronix Sediment Water Filter Cartridge is resistant to chemicals and reduces waterborne contaminants like rust, sediment, silt and sand.
Hydronix SDC-25-4075 Sediment Filter Cartridge specifications:
The Hydronix 75 micron sediment cartridge fits housing units requiring a standard 2 1/2" x 40" filter media. The operating temperature of this water filter is 40 degrees to 145 degrees Fahrenheit. The Hydronix Sediment Cartridge is ideal for a wide range of commercial, industrial, residential and food service applications. The graded density of this filter provides a higher dirt holding capacity over standard spun polypropylene and string wound cartridges. For optimum performance, replace your Hydronix 40" Sediment Filter every 6 months, based on usage and water quality. See our full line of 40" Sediment Filters: 40 Inch Sediment Filters