The Hydronix 10" Pleated Filter is the economical replacement for the Liquatec SPF-45-1020. Constructed from durable non-woven polyester, this sediment filter effectively reduces particles as small as 20 microns. In addition, the Hydronix pleated filter reduces waterborne contaminants such as sand, sediment, silt and rust. Resistant to chemicals and bacteria, the flow rate of the Hydronix 10" filter is 30 gallons per minute.
In addition to replacing the Liquatec SPF-45-1020, this Hydronix 20" sediment filter also replaces the Pentek 255491-43 and Watts FM-BB-10-20. The polypropylene core of this water filter is surrounded by a pleated media and has a high dirt holding capacity that extends the time between filter replacements. The pleated media around a polypropylene core adds strength and the ends are immersed in a thermo setting vinyl plastisol. This superior pleated water filter is suitable for using in a variety of residential, industrial and commercial applications. This sediment filter is durable, washable and reusable.
Hydronix 10" Sediment Pleated Cartridge specifications:
Also known as part number SPC-45-1020, the pleated filter is embedded and sealed at each end of the pleat that fuses the three components together forming a unified end cap and gasket. The temperature capacity ranges from 40 degrees to 125 degrees Fahrenheit (4.4 to 51.7 degrees Celsius). The Hydronix 10" Sediment Pleated filter fits large filter housings requiring a 10" filter media. Water that is of unknown quality or microbiologically unsafe should not be used with this pleated sediment filter without proper disinfection.
See our complete line of 10" Sediment Filters: 10 Inch Sediment Filters