The Pentek PCC-106 Phosphate Crystal Water Filter is a phosphate crystal filter that contains food grade hexametaphosphate that slowly dissolves in your water to reduce scale and rust build-up. This water filter insert is placed in the center of open core filter cartridges. The PCC-106 water filter is also known as part number 155632-22.
This Pentek PCC-106 serves as a protective coating on all metal surfaces to inhibit acidity, alkalinity, hardness, chlorine and other elements that corrode pipes and water equipment. The flow rate of the PCC-106 Water Filter is 1 to 1.5 gpm. This Pentek Phosphate Crystal Filter is used with 10" and 20" sediment, carbon block and radial flow filter cartridges. Many types of water processing equipment like water heaters, ice machines, coffee makers, vending machines, food service equipment and air conditioning equipment should use this PCC-106 Crystal Phosphate Water Filter.
Pentek PCC-106 Phosphate Crystal Filter specifications:
The Pentek PCC-106 effectively treats corrosion, scale and iron issues for up to 6 months. At various feed concentrations and flow rates, this phosphate crystal water filter separates hardness particles to prevent precipitation and forming deposits when heated. The temperature rating for the Pentek PCC-106 Filter is 40 degrees to 100 degrees Fahrenheit. To prevent the phosphates in your crystal water filter from melting and becoming more soluble, use extreme caution to keep your water temperature below 100 degrees Fahrenheit.
As a safety precaution, be vigilant of the following warnings: Do not use this water filter cartridge on water that will be carbonated; avoid using water that is microbiologically unsafe or inadequately disinfected; and avoid contact with the eyes. This product contains calcium hexametaphosphate which causes eye irritation and should be kept out of reach from children. If contact is made with the eyes, flush with water for about 15 minutes then seek immediate medical attention.