Skuttle Humidifier Control Relay A50
A50
The Skuttle A50 Humidifier Control Relay is the replacement part for the following applications:
- Designed for interfacing humidifiers with most heating and cooling systems
The Skuttle A-50 is a humidifier control relay which is designed to interface both 120V and 240V steam humidifiers with most heating and cooling systems. It senses the current rather than voltage, which makes it more reliable and more cost-effective than using sail switches or other relay types. The Skuttle A-50 humidifier control relay activates electrically-activated humidifiers, air cleaners, zone dampers, make-up air controls and more.
Skuttle A-50 Humidifier Control Relay Specifications:
- Part number: Skuttle A50
- Includes 1 Humidifier Control Relay
- Easy to wire and install
- Engineered for safety
- Activates electrically-activated humidifiers, make-up air controls, air cleaners, zone dampers and more
- Dimensions: 2-3/4" w x 1-5/16" h x 1-1/6" d
- Used in both 120v and 240v steam humidifiers
- 24 V Circuit; Maximum Current Load=1 amp
- Relay will switch on a 24-VAC load when 4 amps of the blower motor current is sensed
- Wire lead bracket must carry a minimum of 5.0 amps for proper operation
- Protective rubber guard separates the current-bearing wire from the steel bracket
- Can be used with almost any 120-VAC or 240-VAC steam humidifier
This Skuttle humidifier control relay is easy to install around the blower motor's common lead and then insert into the circuitry. In addition, the Skuttle A-50 control relay is engineered for safety with a protective rubber guard that separates the current-bearing wire from the steel bracket. Skuttle may also be written as Drumatic.
Skuttle Humidifier Control Relay A50 Product Reviews :
Write a review
