Pentek 163007 UV-120-1 Ultraviolet System
The Pentek 163007 UV-120-1 Ultraviolet System effectively controls microbiological intrusions in potable drinking water without the use of environmentally harmful chemicals. The Pentek Ultraviolet systems use a germicidal dose of ultraviolet light at a wavelength of 254 nanometers to disrupt the reproductive process of harmful microbes.
The Pentek UV-120-1 Ultraviolet System is constructed with one ultraviolet lamp (part number 163512) a durable polypropylene housing and cap, a stainless steel reaction chamber insert sleeve, quartz sleeve to protect the lamp, a voltage regulated control module, 6 foot long power cord, built in steel mounting bracket and comes complete with installation hardware and the housing wrench.
The UV-120-1 uses ultraviolet light only and will not accommodate an actual filter. This system does not filter out sediment, particulates or other contaminates. For best results use in conjunction with a whole house filter.
The Pentek 163007 Features:
- Connections: 3/4" NPT
- Dimensions: 5 1/2" x 25 1/2" (Note: Allow 20" of clearance under the housing for changing the bulb.)
- Temp Range: 40-100 F
- Max Pressure: 65 psi
- Flow Rate: recommended 8 GPM
- Power supply: 120 Volts, 50 HZ
- UV Minimum Dose: 16 mJ/cm2 (16,000 microwatt-sec per cm2 )
Click here to view the 163007 Product Specifications.
Click here to view instruction manual.
It is recommended that the quartz sleeve be cleaned every 3 months to ensure maximum exposure of UV light to the water. The UV Bulb should be replaced every 9-12 months. The bulb usually will not burn out in that time, but its efficiency significantly decreases after a year. Never look directly at the lit UV bulb.
Pentek 163007 UV-120-1 Ultraviolet System Product Reviews :
Write a review
Not reviewed yet
Pentek 163007 UV-120-1 Ultraviolet System More Information:
- Product Inquiry