Whirlpool 4317943 Ice Maker Kit
4317943
The Whirlpool 4317943 Ice Maker Kit fits Whirlpool, Roper, Kitchenaid, Amana, and most Kenmore refrigerators. The 4317943 will not work on GE and Hotpoint refrigerators. The Whirlpool 4317943 Ice Maker Kit replaces the following part numbers: Amana D7824706Q, Maytag 1005508 ECKMF-90 and ECKMF-94.
This icemaker includes two new plugs and cords; one round 4 pin connection that measures 7.25" long and one flat rectangle 4 pin connection that measures 10.5" long. The cord plugs into the head of the icemaker then into the refrigerator. Both cords are fuse protected. Also included in this package are two cord retainers and instructions.
In some cases you may have to use your old cord. The cord removes from the icemaker by pushing on the spring clip and pulling it out from the socket.
This icemaker is designed for replacement only and does not include icemaker valve, bucket or shut off arm.
It may take up to 24 hours for your icemaker to begin producing ice.
* Please Note: The Whirlpool 4317943 Icemaker no longer includes a shut off arm, since top-bottom fridges (freezer on top) require a different shut off arm than side-by-side refrigerators. If you are buying a new icemaker or replacing an old one and cannot reuse your existing shut off arm, you'll need to buy one of the following icemaker shut off arms:
- Top-bottom fridges require Whirlpool Ice Maker Shut Off Arm 627792
- Side-by-Side fridges require Whirlpool Ice Maker Shut Off Arm 627913 (Whirlpool 2304354).
A fully compatible replacement ice maker for the Whirlpool 4317943 is the Aquafresh RIM943. It is a more economical ice maker replacement choice for those looking to save money.
Whirlpool 4317943 Ice Maker Kit Product Reviews :
Average rating :
Number of reviews : 10
Write a review
-
Ice Maker Install
Carl Harrold - United States (Friday, December 09, 2011)
Ice maker arrived within two days from being shipped. Fantastic! Read all the instruction very carefuly as I went. Old Ice maker came out as described in instructions. Installed new ice maker according to instructions and everything went as they should have, FANTASTIC !! No rocket science needed here. I just proved anyone can do this cause everything usually goes wrong for me somewhere along the way of doing as the instructions say. Being dislexic DOES NOT help me any either. Many thanks to filtersfast.com for saving me a ton of money too. Local parts house wanted $127.99 for the very SAME ice maker. Did not take me long to make a decision on that. Thanks
-
Whirlpool 4317943 Ice Maker Kit
Glenn - Las Cruces, NM (Saturday, May 14, 2011)
Ice maker kit arrived in 5 days. I was replacing one in a KitchenAid refrigerator that was about 13 years old. None of the wiring harness were compatible so I had to remove the wiring harnrss from my old unitand install it on the new unit. Also, the bracket for the third scew on the bottom of the icemaker did not line up with the hole in the frig so I had to swap it out with the one on the old unit. And had intall the wire arm as mentioned in the specs. It look a while to get everything figured out but once I finally got it installed, it works perfectly. Saved a ton of money compared to hiring a repairman
-
Whirlpool 4317943 Ice Maker
Bob - SoCal (Friday, June 04, 2010)
Ordered my replacement icemaker from Filters Fast and their very helpful sales tech. It was easy to install and came with wire harnesses for various model applications. Remember to save shut off arm from your old ice maker as new one does not provide one. It is easy to pop out with slight pressure carefully apllied with needle nose pliers. Also remove power from unit during install.
-
ice maker replacement
M Rabatin - Mission Viejo, CA (Wednesday, April 07, 2010)
Fast delivery. Installed in 15 minutes. Used shut off arm from existing ice maker. Best price on this site. Others charged twice as much.Highly recommend!
-
Whirlpool icemaker
C. Quinn - Woolwich Twp. NJ (Saturday, November 07, 2009)
Just received my replacement icemaker. Including the time it took to open the box, it tool only 11 minutes to remove the old icemaker and install the new icemaker. Local parts suppliers wanted $105.00-$120.00 for the part alone. If I had it installed by a tech, it would have been an additional $65.00 to $90.00. Total cost to me was ~$75.00 and 11 minutes of my time. Great price and delivery turnaround.
-
Ice Maker
Susan Cahill - Wheatland, Iowa (Wednesday, October 07, 2009)
I am so happy I found FiltersFast.com. I always buy my refrigerator filters there, but this time I needed an ice maker and being able to purchase it from them saved me half of what I would have spent for the exact same part at the retailer where I bought the refrigerator. I usually purchase online, but I wanted to be sure I was making the right choice, so I called and the man was so helpful and reasuring. I recieved promt e-mails updating me of the status of my order. I ordered on Wednesday and was making ice Saturday! They are the best online merchant I have ever used.
-
Great replacement icemaker!
Rick - Southern California (Thursday, July 30, 2009)
Perfect replacement, works great and saved $250.00 by doing it myself!
-
ice maker replacement
ron w. - wytheville, va. (Friday, March 06, 2009)
Recieved the ice maker in days. It was damaged during shipping but with a phone call they had another on the way. Simple installation and started making ice within hours!! Very pleased so far and would recommend this site to anyone. Also had most affordable price on the net. Thanks again!!
-
Ice maker replacement
don graham - iowa (Sunday, October 19, 2008)
We ordered the ice maker kit from this website, and recieved it in three days. Very easy to install, done in less that 20 minutes. It was half the price of the same replacement kit from sears. Well worth the money!
-
ice maker replacement
maria m - atascadero ca (Sunday, August 17, 2008)
Very quick shipping, super easy to install made ice cubes immediatly!! saved us $200
Whirlpool 4317943 Ice Maker Kit More Information:
- Email a Friend
- Product Inquiry
