Filbur FC-0301 Pool and Spa Filter, FC0301

FC-0301

The Filbur FC-0301 Pool and Spa Filter replaces OEM part number 05-08103 (0508103), Unicel 5CH-35 (5CH35) and Pleatco PMAX50-P4 (PMAX50P4).

Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally-bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow.

All Filbur pool and spa filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes such as bacteria, mold, fungi and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur brand pool and spa filters.

The Filbur FC0301 product specifications:

• 3 oz.
• Length: 8 1/2"
• Diameter: 5 5/8"
• Top: Handle
• Bottom: 1 1/2" Male Pipe Threads
• Square Feet: 25

The Filbur FC-0301 works with hot tubs, pools, spas and filters made by LA Spas (Advanced Spa Design).

Cleaning your Filbur Pool and Spa Filters

• It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed.
• In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water.
• Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter.
• DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.

Filbur FC-0301 Pool and Spa Filter, FC0301 Product Reviews :

• Not reviewed yet

Filbur FC-0301 Pool and Spa Filter, FC0301 More Information:

• Product Inquiry