Product Availability

Please provide your e-mail address below to receive a notification when this product becomes available:

Thanks! We'll send you a notification when this product is available!

Filbur FC-1230 Replacement For Hayward CX-250RE

FC-1230

You Choose how often you want your filter, and we take care of the rest.

Product Information

Customers Who Bought This Item Also Bought

HM PH-200 Waterproof pH Meter $79.95
HM Digital pH Buffer Solution Variety Pack $8.95
ITS eXact Micro 7+ Standard Photometer Kit $261.00

The Filbur FC-1230 is a compatible replacement for the following pool and spa filters:

Hayward CX 250 25 sq. ft.
Hayward CX250-RE
Star Clear C250
Unicel C-7626
Pleatco PA25-4/M4
Aladdin 12509

The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow.

All Filbur Pool & Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool & Spa filters.

Filbur FC-1230 Product Specifications:

Part Number: FC-1230

4 oz.
Length: 9 13/16"
Diameter: 7"
Top: Open 3"
Bottom: Open 3"
Square Feet: 25

The Filbur FC-1230 is compatible with hot tubs, pools and filters made by Hayward, Hollibaugh Spas, Pdc Spas, Phoenician Spas, Sonoma Spas and others. Original Manufacturer part number CX-250RE, CX250-RE.

Cleaning your Filbur Pool and Spa Filters

It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed.
In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water.
Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter.
DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.